v 5 trailer hitch | etrailer.com (2024)

Products
Videos
Articles
Questions

Popular Categories

Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks ...
Features: Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers Intended for use on 4" square channel bumpers on the rear of many RVs and towable

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 3500 lbs GTW
• 350 lbs TW
• Bolt-On
• CURT

Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories ...
: 4" x 4" and 4" x 4-1/2" Square RV bumpers Overall dimension: 8" tall x 4" wide x 5-1/4" deep Hitch weight: 7.4 lbs Limited lifetime warranty Note: Bumper weight capacities

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 4-1/2 x 4 Inch Bumper
• 3500 lbs GTW
• 350 lbs TW
• Bolt-On
• etrailer

Replacement grease seals. Double-lip design helps keep water out and grease in.

• Seals
• Grease Seals - Double Lip
• 2.565 Inch O.D.
• 1.719 Inch I.D.
• etrailer

Features: For RV bumper use only Fits 2" x 4" RV bumpers Receiver size: 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall dimensions: 9-1/2" long

• Bumper Mount Hitch
• 4 x 2 Inch Bumper
• 3500 lbs GTW
• 350 lbs TW
• Bolt-On
• CURT

Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constructs and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your ...
-mounted accessory. The base plate helps distribute the load when the pressure plate is engaged to prevent denting and other damage. Shank locks in place with a 5/8" hitch pin and clip (sold separately

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 200 lbs TW
• Mount-n-Lock

Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.Features: 2" Hitch receiver opening to accommodate hitch accessories Solid steel construction Powder coated to resist corrosion For use with up to a 4-bike non-folding, standard bike rack

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 4-1/2 x 4-1/2 Inch Bumper
• 4-1/4 x 4-1/4 Inch Bumper
• 200 lbs TW
• Bolt-On
• Swagman

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 3500 lbs GTW
• 350 lbs TW
• Bolt-On
• Buyers Products

Automatic changeover regulator eliminates interruptions by automatically redirecting LP gas vapor flow from an empty cylinder to a full cylinder. Regulator features an indicator that changes from green to red when cylinder needs to be filled.

• Regulators
• 3/8 Inch - Female NPT
• JR Products
• 1/4 Inch - FIF
• Dual Stage - Automatic Changeover

This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. Hardware included.

• Bumper Mount Hitch
• 4-1/2 x 4 Inch Bumper
• 4 x 4 Inch Bumper
• 200 lbs TW
• Bolt-On
• Buyers Products

This AC unit lets you replace an existing AC or add a new AC to your RV or camper. It works with your existing Advent Air, Dometic, Coleman Mach, or Carrier air distribution box and thermostat - adapter wiring kit (sold separately) may be required. trailers, or off-roading vehicles Fits: roofs 2-1/2" to 5" thick Opening size: 14-1/4" long x 14-1/4" wide Air conditioner power draw (while running): 15 amps Compressor power draw (while

• AC Unit Only
• Cool Only
• 15000 Btu
• Ductless
• Ducted
• Advent Air
• Advent Air
• Dometic
• White

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Also used to connect a remote tank to a high-pressure

• Hoses
• Pigtail Hoses
• 1-1/2 Feet Long
• 1/4 Inch - Male NPT
• MB Sturgis
• Type 1 - Female

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Also used to connect a remote tank to a high-pressure

• Hoses
• Pigtail Hoses
• 2 Feet Long
• 1/4 Inch - Male NPT
• MB Sturgis
• Type 1 - Female

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator on your trailer. Check valve prevents hazardous backflow leakage and is suitable for dual-tank setups.Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Female Type 1 fitting connects to the valve on your

• Hoses
• Pigtail Hoses
• 1 Foot Long
• 1/4 Inch - MIF
• MB Sturgis
• Type 1 - Female

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator on your trailer. Check valve prevents backflow leakage and is suitable for dual-tank setups. Stainless ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Female Type 1 fitting connects to the valve on your

• Hoses
• Pigtail Hoses
• 1 Foot Long
• 1/4 Inch - MIF
• MB Sturgis
• Type 1 - Female

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Also used to connect a remote tank to a high-pressure

• Hoses
• Pigtail Hoses
• 1 Foot Long
• 1/4 Inch - Male NPT
• MB Sturgis
• Type 1 - Female

T-fitting lets you use an auxiliary propane cylinder to power appliances so you won't deplete your camper's tank. Quick-disconnect port allows for easy hook up of the supply hose. Disposable bottle port lets you hook up a small appliance., grills, or other appliances will often require a regulator. Check your equipment to see if one is required. Make camping more fun and relaxing. Moving your 5th-wheel camper or travel trailer once

• Hoses
• Tees
• Adapter Hoses
• 6 Feet Long
• Type 1 - Male
• 1 Inch-20 - Male
• MB Sturgis
• POL - Male
• Type 1 - Female
• Type 1 - Male

This AC unit replaces the Dometic air conditioner on your RV or camper. AC plugs directly into your Dometic setup to work with your existing air distribution box. Start capacitor jumpstarts AC when camp power or generator power isn't enough. UL and c UL certified Specs: Application: Motor homes, travel trailers, and fifth wheels Not approved for school buses, food trucks, enclosed/utility trailers, or off-roading vehicles Fits: roofs

• AC Unit Only
• Cool Only
• 15000 Btu
• Ducted
• Ductless
• Advent Air
• Dometic
• White

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator on your trailer. Check valve prevents backflow leakage and is suitable for dual-tank setups. Stainless ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Female Type 1 fitting connects to the valve on your

• Hoses
• Pigtail Hoses
• 2 Feet Long
• 1/4 Inch - MIF
• MB Sturgis
• Type 1 - Female

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Also used to connect a remote tank to a high-pressure

• Hoses
• Pigtail Hoses
• 1 Foot Long
• 1/4 Inch - Male NPT
• MB Sturgis
• Type 1 - Female

High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.Features: Inner diameter: 1.250" Matching race (sold separately): LM67010 Application: outer bearing for 8-201-5 and 8-213-5 hubs Equivalent to Dexter part 031-032-02

• Bearings
• Standard Bearings
• 1.250 Inch I.D.
• Race LM67010
• etrailer
• Bearing LM67048
• 6000 lbs Axle
• 5000 lbs Axle

This clamp-on receiver attaches to your 4" x 4" or 4" x 4-1/2" RV bumper and provides a 2" x 2" receiver opening for a hitch-mounted bike rack, cargo carrier, or other ...
Features: Trailer hitch receiver clamps onto your RV's rear bumper to accommodate hitch accessories, such as a bike rack or a cargo carrier Clamps onto top or bottom of bumper Powder coated steel

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 4-1/2 x 4 Inch Bumper
• 200 lbs TW
• Bolt-On
• Stromberg Carlson

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve ...
Features: Propane pigtail connects your propane cylinder to a regulator Used for single or dual tank setups on the front of your travel trailer Also used to connect a remote tank to a high-pressure

• Hoses
• Pigtail Hoses
• 3 Feet Long
• 1/4 Inch - Male NPT
• MB Sturgis
• Type 1 - Female

Hose connects the remote tank on your travel trailer to your high-pressure regulator. Type 1 connector provides a high rate of flow before going into bypass mode. Back-check prevents gas leaks.Features: Hose assembly helps feed gas from the remote tank on your travel trailer to your high-pressure regulator RV Type 1 ACME connector provides a high flow rate before going into bypass mode

• Hoses
• Pigtail Hoses
• 1 Foot Long
• 1/4 Inch - Male NPT
• JR Products
• Type 1 - Female

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver. 6" x 5" Bolt pattern: 5" on center x 4" on center Weight capacity: 100 lbs Do not exceed weight rating of your bumper 1-Year warranty Notes: For use with hitch-mounted, RV-approved

• Bumper Mount Hitch
• 4 x 4 Inch Bumper
• 100 lbs TW
• Bolt-On
• Ultra-Fab Products